Publikation

        
Art der Publikation  Konferenz
AutorenDr.-Ing. Christian Junge, Gallep, J., Dr.-Ing. Ralf Wegener, Univ.-Prof. Dr.-Ing. Stefan Soter
Datum7-2010
TitelSimulation and Verification of an Eccentric Press System Actuated by Hyraulic-Clutch-Brake-Combination controlled by a Linear Drive
KonferenzIEEE R8 International Conference on Computational Technologies in Electrical and Electronics Engineering SIBIRCON-2010
OrtIrkutsk Listvyanka
LandRussland
AbstractThis paper deals with a Matlab/Simulink-Simulation of an eccentric press with an hydraulic Clutch-Brake- Combination (CBC) and the verification on a standard moulding press. The outstanding characteristic of this system is the special control of the CBC. A servo converter controlled linear drive with an integrated hydraulic cylinder generates the pressure for the CBC. A developed pressure control is able to control the torque of the CBC and therefore the acceleration and deceleration of the powertrain. The simulation has been made to predict the behavior of the controlled CBC in an eccentric press. The simulation results are finally compared with the measurements at the real system.

Photovoltaikanlage


Aktuelle Daten:

Tagesenergie: kWh

Gesamte Energie: MWh

CO2-Ersparnis: t

Momentane Leistung: kW

Loading...













Kontakt

Bergische Universität Wuppertal
Lehrstuhl für Elektrische Maschinen und Antriebe

Rainer-Gruenter-Str. 21
Gebäude FH
42119 Wuppertal

Tel: +49(0) 202 / 439 1950
Fax: +49(0) 202 / 439 1824

soter@uni-wuppertal.de